Fee-charging Standards for Measuring Instruments
1.中華民國八十八年一月二十日經濟部(88)經中標字第 87037124 號令
訂定發布全文 17 條
2.中華民國八十八年九月一日經濟部(88)經標檢字第 88387396 號令修
正發布第 13 條附表
3.中華民國八十九年一月十二日經濟部(89)經標檢字第 88391492 號令
並修正發布第 5 條之附表二;增訂發布第 14-1~14-3 條條文
4.中華民國八十九年十月十一日經濟部(89)經標檢字第 89256922 號令
增訂發布第 3-1、3-2 條條文
5.中華民國九十年十二月二十六日經濟部(90)經標檢字第 09004627270
號令修正發布第 5 條之附表二;並增訂第 14-4、14-5、14-6 條條文
6.中華民國九十二年十月八日經濟部經標字第 09204611060 號令修正發
布全文 33 條;並自發布日施行
7.中華民國九十三年一月二十八日經濟部經標字第 09304601030 號令修
正發布名稱及第 1~3、19、33 條條文;並增訂第 29-1、32-1、32-2
條條文
(原名稱:度量衡規費收費準則;新名稱:度量衡規費收費標準)
8.中華民國九十四年五月二日經濟部經標字第 09404603580 號令修正發
布第 6 條條文之附表一及第 28 條條文之附表九
9.中華民國九十五年七月三日經濟部經標字第 09500097860 號令修正發
布第 6、14、28、29 條條文之附表一、六、九、十
10. 中華民國九十五年十二月二十九日經濟部經標字第 09503841370 號
令修正發布第 10、24、26 條條文及第 28 條條文之附表九;並增訂
第 22-1 條條文
11. 中華民國九十六年六月二十九日經濟部經標字第 09603819260 號令
修正發布第 4、7、9、21 條條文及第 28 條之附表九、第 29 條之
附表十
12. 中華民國九十七年二月十四日經濟部經標字第 09700004730 號令修
正發布第 28 條條文之附表九
13. 中華民國九十八年一月二十二日經濟部經標字第 09803801350 號令
修正發布第 28 條條文之附表九
14. 中華民國九十九年三月十一日經濟部經標字第 09900524740 號令修
正發布第 22、24 條條文及第 6 條條文之附表一、第 14 條條文之
附表六、第 23 條條文之附表八、第 28 條條文之附表九;增訂第 2
2-2 條條文
15. 中華民國九十九年六月十五日經濟部經標字第 09903817530 號令修
正發布第 17 條條文及第 6 條條文之附表一、第 28 條條文之附表
九
16. 中華民國一百年四月二十五日經濟部經標字第 10003810510 號令修
正發布第 30 條條文及第 28 條條文之附表九;增訂第 32-3 條條文
17. 中華民國一百零一年二月三日經濟部經標字第 10103802910 號令修
正發布第 28 條附表九
18. 中華民國一百零二年四月二十五日經濟部經標字第 10203810910 號
令修正發布第 3、5、33 條條文及第 28 條條文之附表九;增訂第 3
2-4 條條文;除第 5 條條文自一百零二年七月一日施行外,自發布
日施行
19. 中華民國一百零三年一月十日經濟部經標字第 10303800050 號令修
正發布第 28 條條文之附表九
20. 中華民國一百零三年十二月二十七日經濟部經標字第 10303826950
號令修正發布第 17 條條文及第 28 條條文之附表九、第 32-4 條條
文之附表十二
21. 中華民國一百零五年二月十五日經濟部經標字第 10503802370 號令
修正發布第 16、19 條條文及第 14 條條文之附表六、附表七、第 2
8 條條文之附表九及第 32-4 條條文之附表十二;並增訂第 18-1、2
6-1 條條文
22. 中華民國一百零六年四月二十八日經濟部經標字第 10603807920 號
令修正發布第 4 條條文及第 28 條條文之附表九、第 32-4 條條文
之附表十二
23. 中華民國一百零七年六月二十二日經濟部經標字第 10703812200 號
令修正發布第 9 條條文之附表三、第 11 條條文之附表五、第 28
條條文之附表九
24. 中華民國一百零八年十一月二十一日經濟部經標字第 10803819380
號令修正發布第 10 條條文之附表四、第 28 條條文之附表九、第
32-4 條條文之附表十二
25. 中華民國一百零九年十一月十七日經濟部經標字第 10903818140 號
令增訂發布第 22-3 條條文
26. 中華民國一百十年八月二十日經濟部經標字第 11003813460 號令增
訂發布第 12-1 條條文
27. 中華民國一百十一年三月十五日經濟部經標字第 11103803790 號令
修正發布第 28 條條文之附表九
28. 中華民國一百十一年十一月三日經濟部經標字第 11103817110 號令
修正發布第 14 條條文及第 28 條條文之附表九;並增訂第 14-1 條
條文
29. 中華民國一百十二年六月十三日經濟部經標字第 11253500150 號令
修正發布第 28 條條文之附表九
30. 中華民國一百十三年五月十四日經濟部經標字第 11353500190 號令
修正發布第 1、29 條條文及第 28 條條文之附表九
31. 中華民國一百十四年九月十六日經濟部經標字第 11453500460 號令
修正發布第 5、16、17、30、33 條條文及第 10 條條文之附表四;
刪除第 13 條條文;並自發布日施行資料來源:全國法規資料庫(ChOrder.json,版本 2026/7/24 上午 12:00:00)・政府資料開放授權
The Standards are established in accordance with Article 59 of the Weights and Measures Act (hereinafter referred to as "the Act") and Paragraph 1, Article 10 of the Charges and Fees Act.
The verification agency (institution) mentioned in these Standards shall mean the dedicated weights and measures authority, its branches, or any other government agencies or institutions commissioned by the dedicated weights and measures authority.
1The fees for measuring instruments as referred to in these Standards shall mean the following:
21.Verification fee;
32.Appraisal fee;
43.Type approval fee;
5
65.Calibration fee;
76.Certificate and License fee;
87.Permit fee;
98.Registration fee;
109.Calibration fee for weights.
1110.Certification Fee
12Fees shall be collected in New Taiwan Dollars. The total sum shall be rounded-up to the closest dollar value.
1An NTD 500 on-site verification fee for each person each time shall be collected by the verification agency (institution) for dispatching its personnel to conduct verification at the site of storage place of measuring instruments in accordance with Article 8 of the Regulations Governing Verification and Inspection of Measuring Instruments, except that the verification agency (institution) dispatch its personnel to perform the official business at the site of storage or installation place of measuring instruments where they receive an application for verification then and complete the verification within the same day.
2If the personnel performing the official business as referred to in the preceding paragraph cannot commute to the place of verification and back within the same day or has to commute between different branches, the on-site fees shall be collected in accordance with the costs and expenses set forth in the Directions Governing Domestic Business Travel Expenses.
The verification fee for taximeters shall be NTD 35 per set of stationed taximeters and NTD 200 for in-service verification / vehicle-installed verification per set.
The verification fees for weighing instrument are shown in Annex 1.
The verification fee for non invasive automated sphygmomanometers is NTD 15 per set.
The verification fees for metal graduated measuring pails and tanks are shown in Annex 2.
The verification fees for diaphragm gas meters are shown in Annex 3. If the applicant requests for verification conducted with its own verification equipment and the verification is conducted one by one by the dedicated weights and measures authority or its branches, the verification fee shall be charged in the amount of two-fifths of the total verification fee payable for the declared quantity of measuring instruments under application.
The verification fees for water meters are shown in Annex 4. If the applicant requests for verification conducted with its own verification equipment and the verification is conducted one by one by the dedicated weights and measures authority or its branches, the verification fee shall be charged in the amount of two-fifths of the total verification fee payable for the declared quantity of measuring instruments under application.
The verification fees for oil meters are shown in Annex 5.
The verification fee for liquefied petroleum gas flow meters is NTD 2,000 per set.
1The verification fee for Air to liquid volumetric ratio (A/L) measuring instruments with only one set of connecting device is NTD 4,300 per set.
2In case of one host with more than one set of connecting device applying for verification at the same time, each additional set of connecting device will be charged NTD3,000.
(Deleted)
The verification fees for general electricity meters are shown in Annex 6, and the verification fees for transformers matched with electricity meters are shown in Annex 7.
The verification fee for Electric Vehicle Supply Equipment each time is NTD 12,000 for base fee for each site and NTD 700 for each set at the same site.
The verification fee for radar speedometers is NTD 5,000 per set.
The verification fee for sound level meters shall be NTD 7,900 per set and Octave-band filters shall be NTD 3,200 per set.
The verification fee for breath alcohol testers shall be NTD 11,500 per set for new testers, or NTD 8,200 per set for tester in-use; the verification fee for evidential breath alcohol analyzers shall be NTD 12,700 per set for new analyzers, or NTD 11,200 per set for analyzers in-use.
The verification fee for rice grain moisture meters is NTD 2,400 per set.
The verification fee for corn moisture meters is NTD 3,400 per set.
The verification fee for vehicle exhaust emissions analyzers is NTD 7,000 per set for new analyzers, or NTD 5,050 per set for analyzers in-use.
The verification fee for illuminance meters is NTD 3,700 per set for new meters, or NTD 3,300 per set for in-use meters.
The verification fee for thermometers is NTD 2 per set.
For verification conducted by an organization on its own, the verification fee shall be charged in the amount of
The verification fee for Laser speedometers is NTD 4,500 per set.
1The verification fee for inductive loop speedometers is described as follows:
21. The verification fee for the controller cabinet of inductive loop speedometers is NTD 4,200 per set for new speedometers, or NTD 3,200 per set for speedometers in-use.
32. The base verification fee for the inductive loop of inductive loop speedometers is NTD 6,700; one lane at each site. For each additional lane at the same place of verification, additional NTD 500 shall be charged.
1The verification fee for average speed control devices is described as follows:
2In case of a single road section is NTD 50,000 per set.
3In case of a two-way road section application at the same time, the two sets are NTD 80,000 in total.
The appraisal fees for water meters are shown in Annex 8.
1The appraisal fee for electricity meters is described as follows:
21. Watt-hour meters and static electricity meters exclusively functioning watt-hour measurement: NTD 1,800 per set;
32. Var-hour meters and static electricity meters exclusively functioning var-hour measurement: NTD 1,800 per set;
43. Watt-hour demand meters and static electricity meters exclusively functioning watt-hour demand measurement: NTD 2,300 per set; and
54. Transformer matched with electricity meters: NTD 3,200 per set.
The appraisal fee for diaphragm gas meters is NTD 1,300 per set.
1The type approval fee for measuring instruments is NTD 5,000 per set.
2The series type approval fee for measuring instruments is NTD 3,000 per set.
The extension of the validity of type approval or series type approval fee for measuring instruments is NTD 5,000 per set.
1For measuring instrument laboratories that apply for becoming designated laboratories, the assessment fee shall be charged on the basis of NTD 8,000 per man-day; the same shall apply for re-assessment.
2An assessment fee of NTD 4,000 shall be charged for assessments conducted in less than four (4) hours.
3An assessment fee of NTD 2,000 shall be charged for assessments conducted to applications made in accordance with Article 16 of the Regulations Governing the Recognition of the Designated Testing Laboratory for Measuring Instruments.
The calibration fees for measuring instrument by national measurement laboratories are shown in Annex 9. The calibration fee shall be doubled for cases that the applicant requests for urgent processing.
The calibration fees for measuring instruments handled by the dedicated weights and measures authority and its branches are shown in Annex 10. An additional fee of NTD 450 shall be charged for each application.
An on-site calibration fee of NTD 500 per person-time shall be charged for calibration conducted by personnel dispatched by the dedicated weights and measures authority or its branches at the storage place of measuring instruments. If the person cannot commute to the place of calibration and back within the same day, the calibration fees shall be collected in accordance with the costs and expenses set forth in the Directions Governing Domestic Business Travel Expenses.
1Except the certificate fee of NTD 500 for metrological technical personnel certificates, certificate and license fees for certificates or licenses issued in accordance with provisions of the Act shall be NTD 1,000. Its reissuance or replacement fee shall be NTD 1,000 and the charge of reissuance or replacement of a verification mark is the same.
2When reissuance or replacement of the verification mark mentioned above requires sending personnel to the location of the measuring instruments, an on-site fee of NTD 500 per person per visit shall be charged for each location.
A permit fee of NTD 2,000 shall be charged to an organization that is allowed to carry out self-verification.
1The permit fees for a weights and measures business license is described as follows:
21. NTD 2,200 for manufacturing or repairing business. The same rate shall apply to alteration of the scope specified in the license.
32. NTD 400 for importers.
43. NTD 400 for an extension of the license.
5The above rates shall apply to licenses issued to branches of the organization.
The registration fee for metrology technical personnel is NTD 1,200 per person.
The calibration fees for weights conducted by the dedicated weights and measures authority are shown in Annex 11.
The re-test fee for prepackaged products is NTD 3,000 for each time.
The certification fee for reference material by national measurement laboratories are shown in Annex 12.
These Standards shall take effect upon the date of promulgation.